Aftermarket Products & Services for Combined Cycle Steam Systems

Vogt Power International

DELIVERING UNMATCHED EXCELLENCE-IN-HEAT RECOVERY®

INSPECTIONS & FIELD SERVICES

•  HRSG inspections
•  Videoscope inspections
•  FAC inspection & UT mapping
•  Operational and engineering review
•  High energy piping, metallographic inspection
•  Condition & remaining life assessment
•  Failure analysis
•  Service agreements

ENGINEERING STUDIES

•  Effects of gas turbine upgrades
•  Cycling
•  Turndown studies
•  Heat rate improvements
•  Flow maldistribution
•  Structural
•  Circulation

TURNKEY RETROFITS

•  Module / HARP replacement
•  Distribution grid / perforated flow plates
•  Pressure parts
•  Casing, insulation and liners
•  Baffles
•  Attemperators
•  Burner upgrades
•  SCR and CO systems
•  Sparging systems

COMMISSIONING & START-UP

The HRSG (which is installed, or is complete or near completion) is tested to verify if it functions according to its design objectives and specifications.

REPLACEMENT PARTS

•  Spare part programs
•  Valves and valve parts
•  Gaskets
•  Tubes (bare and finned) and tube plugs*
•  Viewports
•  Diverter and stack dampers
•  Water level gauge & guided wave radar
•  Steam drum manway
•  Hot torqueing solutions
•  IMTEC access doors
•  Steam sample nozzles
•  Instrumentation
•  Expansion joints
•  Bellows
•  Pipe supports and silencers
•  Steam drum internals

Riley Power logo

PEOPLE, AVAILABILITY, AND QUALITY OF DELIVERABLES

HIGH ENERGY PIPING INSPECTIONS

Riley Power Inc. offers High Energy Piping inspections and walk downs.  Hot and cold walkdowns of the piping hangers is critical and should be done on an annual basis. During outages welds and welded components in the various high energy piping systems should be inspected and tested. Riley can assist in laying out plans associated with the weld inspections. The testing and inspection approaches vary based on the piping materials.

Boiler Tube Company of America

ORIGINAL EQUIPMENT MANUFACTURER SERVING PRESSURE PARTS NEEDS FOR OVER ONE CENTURY

HARPS

Full service capabilities from spiral fin production to fabrication and assembly.

SPIRAL FIN TUBING

Boiler Tube Company of America has a state-of-the-art high frequency spiral finning machine. The machine supplied by JTC Inc. has many world class features with a broad range of capabilities.

BTA has also improved fabrication capacities through installation of several heavy lift overhead cranes. The finning and assembly areas can handle completed assembles up to 80,000 pounds. This machine has internal inline belt sanders to insure all material is in consistent acceptable condition for welding as well as automatic anti-rust coating capabilities applied after welding to help prevent corrosion. After fabrication, tubes will be prepped for shipment either as single element tubes or as mentioned large assembled components.

BTA IMTEC Doors logo

EXPERTLY ENGINEERED DOOR SOLUTIONS FOR MAXIMUM SAFETY AND COST SAVINGS.

IMTEC HRSG DOORS

Imtec’s HRSG doors are available for all sections of the HRSG. The HRSG door must withstand high operating and excursion gas temperatures. Therefore, on HRSG doors the inner side insulation pan is closely matched to the liner thickness to minimize flow disruption.

Equipped with high efficiency insulation supported by interior shelves and all contained in a protective insulation pan which, for flexibility and heat expandability, is made with slots and in movable sections from heat resistant steel.

Thermal Engineering International (TEi) logo

DESIGN SOLUTIONS FOR ALL YOUR HEAT TRANSFER EQUIPMENT

PARTS
  • Anode
  • Basket Tips
  • Baffle Plates
  • Channel Assemblies/Covers
  • Connectors
  • Demister
  • Diaphragm Plates
  • Expansion Joints
  • Extrusion Seals / Sealant
  • Gaskets
  • Kits – Vaccum System
  • Lantern Ring
  • Manway Assemblies/Covers
  • Manway Handling Device
  • Orifices
  • O-Rings
  • Packing
  • Partition Covers/Bolting Ring
  • Pressure Gauges
  • Rapture Discs
  • Relief Valves
  • Small Heat Exchanger
  • Spray Nozzles
  • Studs, Nuts, Bolts, Washers
  • Temperature Gauges
  • Thermocouples
  • Thermowells
  • Tube Bundle Replacement
  • Tube Expander Tool Set
  • Tube Plugs
  • Tubesheet (Stationary/Floating)
  • Tube Stakes
  • Torus Ring
  • U-Tubes
ENGINEERING CONSULTING
  • Performance analysis
  • Model testing
  • FEA analysis
  • Heater train studies
  • Vibration analysis
  • Repair vs. replace planning
  • Equipment modifications
  • Training seminars
TEIC Heat Exchanger Services Logo

EXTEND THE LIFE OF YOUR ASSET

TUBE CLEANING
  • Projectile
  • Rotary
TUBE TESTING
  • Eddycurrent
  • Pneumatic Vacuum
  • Hydro & Air
  • Shell
TUBE STABILIZERS
  • Cable design
  • Solid rod design
TUBE PLUGGING
  • Mechanical
  • Explosive
TROUBLESHOOTING

Troubleshooting and repair of Condensers, Feedwater heaters or any type of Shell and Tube Heat Exchanger issues by trained and qualified personnel.

TUBE SAMPLES
  • Condenser
  • U-Tube
  • Feedwater Heaters
  • Lube Oil Coolers
TUBE SLEEVES
  • Condenser
  • U-Tube Feedwater Heater
  • Lube Oil Cooler
INSTALLATIONS
  • Condenser
  • U-Tube Feedwater Heater
  • Lube Oil Cooler
REPAIRS & MODIFICATIONS
  • Condenser
  • U-Tube Feedwater Heater
  • Lube Oil Cooler
teic construction services logo

TOP PEOPLE, REGIONAL LOCATIONS, WE DELIVER

CONSTRUCTION SERVICES

TEIC Construction Services leads the industry with more than 20 years experience in providing direct-hire, on-site construction services for the installation, repair, alteration and maintenance of boilers and boiler-related equipment nationally. Our services include HRSG erections.

OUTAGE SERVICES

Focused on doing outage work the right way, TEiC provides open shop direct-hire construction services for new and existing plants. TEiC provides on-site construction services for the installation, alteration, repair, or maintenance of any OEM’s boiler and boiler related equipment, including but not limited to pressure parts, firing systems, air heaters, fans, feedwater heaters, condensers, piping, and ductwork.

With a proven track record of safety, on-time completion, and customer satisfaction, you can count on TEiC to meet all your requirements of new or existing installations.

Balance of Plant Services (BOP)

  • Structural Steel
  • Piping & Valves
  • Duct Work
  • Conveyors

Contact Us

Start typing and press Enter to search